SAM9x5-CM - CPU Module with ATMEL AT91SAM9X5 series

Top View Bottom View
Starter Kit is available »
Hardware features:
 
MCU: AT91SAM9X5 series, 400 MHz ARM926EJ-STM ARM® Thumb® processor @ 1.0V
128 or 256 MiB DDR2 SDRAM, 16-bit
256 MiB NAND Flash (see note)
4 MiB Atmel SPI Flash
I2C EEPROM with 512 KiB (65,536 x 8)
10/100 MBit/s Ethernet
One Wire 1024-bits EEPROM and 64-bits ROM
SO-DIMM 200 JEDEC MO-274 module
 
  Note: PEEDI can easily program NOR Flash, NAND Flash JFFS2 images and DataFlash devices using the JTAG interface
 
Linux Software:
  The page provides the latest information for Linux related software on this MPU series.
 
Android Software:
  The page provides the latest information for Android on this MPU series.
 
Development tools:
 
Starter Kit for SAM9x5-CM
PEEDI JTAG Emulator and Flash Programmer capable to program in standalone mode NOR Flash devices, NAND Flash devices with JFFS2 image or bootloader, DataFlash devices.
 
Part numbers
 
- SAM9G35-CM - populated with AT91SAM9G35
- SAM9G25-CM - populated with AT91SAM9G25
- SAM9G15-CM - populated with AT91SAM9G15
- SAM9X35-CM - populated with AT91SAM9X35
- SAM9X25-CM - populated with AT91SAM9X25
Optional components:
- 10/100 Mbit/s Ethernet PHY DM9161
- 256 MiB DDR2 instead of 128 MiB.
- Industrial temperature range
- SPI Flash AT25DF321
 
AT91SAM9X5 Key Features:
- 400 MHz ARM926EJ-S
- DSP Instruction Extensions
- ARM Jazelle Technology
- 16 KiB Data Cache
- 16 KiB Instruction Cache
- Memory Management Unit
- External Bus Interface
- DMA Controller
- DDR2 Interface
- IIS audio interface
- Embedded ICE
- 32 KiB Internal SRAM
- 217 balls BGA
- Low power, Vcore 1.0V
 
Download
SAM9x5-CM schematics
Linux Install instructions
SAM9x5-EK User Guide
Ronetix-toolset ARM
ARM Cross Development Guide
PEEDI User's Manual
Application notes
Eclipse User Guide
AT91SAM9X5 series MPU features
 
FeaturesSAM9G15SAM9G35SAM9X35SAM9G25SAM9X25
EMAC-RMIIRMIIMIIMII + RMII
ADC channels12121277
CAN--y-y
5-wires touchscreenyyy--
LCDyyy--
ISI---y-
additional USART3---yy