PM9G45 - CPU Module with ATMEL AT91SAM9G45

Top View Bottom View
Starter Kit is available »
Hardware features:
MCU: AT91SAM9G45, 400 MHz ARM926EJ-STM ARM® Thumb® processor
128 MiB DDR2 SDRAM, 16-bit
256 MiB NAND Flash (see note)
8 MiB Atmel Serial DataFlash (optional, see notes)
10/100 MBit/s Ethernet
Serial number chip DS2401 (optional)
SO-DIMM 200 JEDEC MO-274 module (67x35.5mm)
  Note: PEEDI can easily program NOR Flash, NAND Flash JFFS2 images and DataFlash devices using the JTAG interface
  Note: The DataFlash is optional. Get in contact with Ronetix sales for information.
Windows CE 6.0
Linux Software:
Linux Install Readme
GNU Tools (compiler, linker, debugger, etc.)
The support for PM9G45 is a part of the U-BOOT mainline and the latest version can be obtained from the git repository at U-BOOT git repository
The PM9G45 support is included in the Barebox mainline, available at Barebox git repository
Linux Kernel including drivers for:
- NAND Flash, DataFlash
- Ethernet, Serial, USB Host, USB Slave
- LCD + Touchscreen
- Audio
KaeilOS/OpenEmbedded Distribution

The SODIMM200 pinout of PM9G45 module has been reordered, which results in the new PM9G45-R module, made to upgrade existing PM9263 products.

Development tools:
Evaluation Board EB9G45
PEEDI JTAG Emulator and Flash Programmer capable to program in standalone mode NOR Flash devices, NAND Flash devices with JFFS2 image or bootloader, DataFlash devices.
AT91SAM9G45 Key Features:
- 400 MHz ARM926EJ-S
- DSP Instruction Extensions
- ARM Jazelle Technology
- 32 KiB Data Cache
- 32 KiB Instruction Cache
- Memory Management Unit
- Dual External Bus Interface
- DMA Controller
- DDR2 Interface
- AC97 Interface
- Embedded ICE
- 128 KiB Internal ROM
- 64 KiB Internal SRAM
- 324 balls TFBGA
- Low power, Vcore 1.0V
User Manual, Schematics
Linux Install Readme
Open Embedded Install Readme
Ronetix-toolset ARM
ARM Cross Development Guide
PEEDI User's Manual
Application notes
Eclipse User Guide